Notify me when the price drops
We will email you if we find a lower price on this product!
Packaging Of The Kaka BS-85 Portable Band Saw
The box is rather large, roughly L 28 X W 14 x H 18 (720 x 37 x 45mm) and it weighs 47 lbs or 21kg. The BS-85 was protected very well with polystyrene packing surrounding it completely.
The motor has a soft start instead of a basic on/off type switch. Having a soft start eliminates the jolt you get with an on/off switch. The saw ran very smoothly with no vibrations thanks to the quality of the motors bearings. The large air vents allow for efficient cooling for extended periods of use, for many years to come.
The speed controller allows for stepless speed regulation, giving you the ability to set the saw for the different materials and thicknesses. Set at low speed, the band saw operates at 30 meters per minute (mpm) and 88 mpm on high.
For Stainless Steel – 30 mpm
For Mild Steel – 60mpm
For Aluminium – 88mpm
The above speeds are recommended in the owners manual. These speeds will extend the blade life.
The main body of the BS-85 is made from cast aluminum, giving it a lot of strength but still keeping the weight down to keep it portable.
The base is a heavy-duty thick gauge pressed steel to give the saw a lower center of gravity when it is in the vertical position.
The vice is made from cast iron with a fine ground finish on the mating surfaces allowing for smooth clapping of the job, eliminating the jaw binding, due to too much play in the moving parts.
The material stop can extend out to 26 1/2 inches (680mm), giving accurate cuts if you have a number of cuts the same length.
The Ability To Turn The Saw Head When Cutting A Mitre (45 degrees)
The huge benefit of portable band saws is the tool-free adjustment, giving it the ability to turn the cutting head up to 45 degrees. Cutting a 19 1/2′ length (6-meter) of square tube at 90 then 45 is easy. The head of the bandsaw pivots means you don’t have to take the material out of the saw to physically move the saw to the correct angle then put the material back into the saw. Saving time and lots of frustration.
The Kaka Band Saw comes with a stainless steel 8-12 tooth per inch blade, giving you the ability to get to work on that project right away. The blade size on the Kaka band saw is 52.17 x 0.51″ x 0.03″ (1325x 13 x 0.65mm). The blades come in a range of teeth per inch to better suit your requirements.
Item No.:188000-110V
Model: BS-85
Capacity: Circular @90° 85mm(3.3”)
Rectangular @90° 85x105mm (3.3”x4.1”)
Circular @45° 70mm(2.7”)
Rectangular @45° 65x75mm(2.5”x2.9”)
Blade speed @60Hz 40-88MPM
@50Hz 40-88MPM
Blade size 13x0.65x1325mm TPI 14
Motor power 1000W
Drive Gear
Voltage 110V
Power Phase 1PH
Packing size 28x14x18in
N.W./G.W. 41/46lb
SHIPPING
We ship to within 48 lower states of US. We cannot process our order to Hawaii, Alaska or APO/FPO Box address.
For item weight is less than 150lb, we usually ship item through FedEx or UPS and the handle time would within 2 business days. A tracking information will be available online once the shipment clears. It usually takes 4-5 business days to arrive. If you need any expedite shipping, please contact us first and we can make sure that we will offer the best shipping option for you.
For item weight that is beyond 150lb, we will utilize truck freight shipping. The item will ship via central transport to your address. A phone number is required for Freight shipped items. Freight shipped items must be signed for and you will be responsible to assist in the unloading of merchandise from the truck bed. For an additional fee (charged by the carrier, not Kaka), trucks with lift-gates can be arranged to move your products from the bed of the truck to the ground, at that point it will be up to you to move the product. The shipping carrier will call and schedule delivery, at which time, you may request a lift-gate and arrange payment with the carrier for that service.
The usual delivery time for truck shipping is approximately 3-7 business days and we do not ship items on weekends or holidays.
RETURN POLICY
We accept returns within 30 days of arrival of your product.
We will charge 15% re-stock fees for the return.
The product you returned should be well functioned that packed in the original box. Before you return the item, please let us know first in order to make the return fast and effective.
The return fee would be at the buyer’s expense. We recommend utilizing trusted carrier that comes with online tracking and insurance.
Once we receive your product and examine that the product condition is fit our criteria, we will issue the refund immediately.
WARRANTY
KAKA guarantees 1-Year Product Warrant.
KAKA warrants every product that sells. If any of our tools need to be repaired, we will send it to you right away. If you have difficulty, please email us and we will get back to you within 24 hours.